MikroElektronika mikromedia PIC24 Manuel d'utilisateur télécharger pdf (Page 32)

Page 32

10. Accelerometer

On board ADXL345 accelerometer is used

to measure acceleration in three axis: x, y and

z. The accelerometer function is defined by the

user in the program loaded into the microcontroller.

Communication between the accelerometer and the

microcontroller is performed via the I

C interface.

Figure 10-1:

Accelerometer

module

You can set the accelerometer address to 0 or 1 by re-soldering

the SMD jumper (zero-ohm resistor) to the appropriate position.

Jumper is placed in address 1 position by default.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Pas de commentaire

MikroElektronika mikromedia PIC24 Manuel d'utilisateur Page 32