MikroElektronika mikroProg Manuel d'utilisateur télécharger pdf (Page 12)

mikroProg Suite for PIC

MikroElektronika

page

6.0. Additional Settings and Information

Along the right side of the main window, there are buttons providing an access to windows containing additional settings and information

on the microcontroller, as well as an option for monitoring voltage level changes during programming. All the windows (Conguration

Bits, MCU Info and Voltages) may be active at the same time.

Figure 6-1: Additional options and settings

Button to access the Conguration Bits window

Button to show information on selected microcontroller

By clicking on the Cong button, a window Conguration Bits will appear. The window contains options for setting conguration bits of

the microcontroller such as hex code protection, selection of the memory location to write the hex code in, etc.

Figure 6-2: Conguration bits settings

Hex code protection option

Option for disabling data to be

loaded into some MCU’s FLASH

memory locations

Callibration word protection

Options for setting microcontroller’s

parameters

Button to set conguration bits to

default values

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

MikroElektronika mikroProg Manuel d'utilisateur Page 12